Filter
Top Products
- 13 -
<CAMERA SETUP>
<PRIVACY ZONE>
<CAMERA ID>
EXIT
CANCEL
DEFAULT
D/N MODE AUTO
D/N LEVEL LOW
SHUTTER IRIS
GAIN STD
SYNC INT
BLC OFF
SHARPNESS MID
WB AUTO
<OPTION>
BACK
8.2 Setting mode call and basics
<CAMERA SETUP>
Press the SELECT switch down about 2 seconds then
menu will appear on the display.
Use the buttons to select <CAMERA SETUP>.
8-2-1. D/N MODE (DAY/NIGHT MODE)
Selections:
AUTO (default):The camera will sense the brightness
level and switches to color mode or
monochrome mode.
COLOR: Color mode
B/W: Monochrome mode
Process:
1. Position the cursor ( ) next to CAMERA SETUP
and press the SELECT switch to access the
camera menu.
2. Position the cursor ( ) next to D/N MODE and
press the SELECT switch to access menu.
3. Use the buttons to select AUTO, COLOR or B/W.
4. Press the SELECT switch to accept the selection.