Filter
Top Products
- 16 -
8-2-6. BLC (BACK LIGHT COMPENSATION)
Selections:
When using the automatic electronic iris with an auto
iris lens, the exposure adjustment is automatically
performed so that the best picture is obtained at the
next monitor zone.
The four different BLC zones are displayed below:
Process:
1. Position the cursor ( ) next to CAMERA SETUP
and press the SELECT switch to access the
camera menu.
2. Position the cursor ( ) next to BLC and press the
SELECT switch to access menu.
3. Use the buttons to select BLC1, BLC2, BLC3,
BLC4 or OFF (default).
4. Press the SELECT switch to accept the selection.
OFF BLC1 BLC2 BLC3 BLC4
Video monitor Video monitor Video monitor Video monitor Video monitor
Note: Use this function if there is intense light in the area outside the zone.
D/N MODE AUTO
D/N LEVEL LOW
SHUTTER IRIS
GAIN STD
SYNC INT
BLC OFF
SHARPNESS MID
WB AUTO
<OPTION>
BACK