Filter
Top Products
13
(1. 2) Changing each setting in SS (synchro. scan) mode
(a) Changing the shutter speed setting
1
Set the "→" to SS by pushing [MENU UP], [MENU DOWN] buttons.
2
Select the shutter speed by pushing [DATA UP], [DATA DOWN] buttons.
(b) Partial scanning setting
1
Set the "→" to PART by pushing [MENU UP], [MENU DOWN] buttons.
2
Select either OFF or 60fps, 90fps by pushing [DATA UP], [DATA DOWN] buttons.
Note:
The longer the storage time with extended exposures, the more visible certain characteristics of CCD
cameras become: fixed pattern noise, white pixels, etc.
OFF : 1H/796H↔795H/796H↔OFF↔2FRM↔512FRM
60fps : 1H/387H↔386H/387H↔OFF↔2FRM↔512FRM
90fps : 1H/258H↔257H/258H↔OFF↔2FRM↔512FRM
• Shutter mode MANU, SS, E.TRG
• Synchro. scanning setting
• Partial scanning switch OFF/60fps/90fps
-- SHUTTER --
MODE SS
SS OFF
PART
OFF
<MODE = SS>
Move up down
By pushing
MENU UP, DOWN
Set by pushing
DATA UP, DOWN
2004.03.24, 0:59 PMPage 13