Filter
Top Products
7
4. NAMES AND FUNCTIONS
1
Prism faceplate The protection cap is attached on the lens mount portion. After removing the cap,
mount the lens. Be careful not to scratch or touch the optical area.
2
DISP button Used when switching the display.
3
PAGE button Used when switching to the menu and when selecting the menus.
4
MENU UP button Select the function to be confirmed or changed on the menu.
5
MENU DOWN button Select the function to be confirmed or changed on the menu.
6
DATA UP (AWB) button Changes the value of the function selected by the MENU (UP/DOWN) button. (Also
used when using AWB.)
7
DATA DOWN button Changes the value of the function selected by the MENU (UP/DOWN) button.
8
DC IN 12V terminal Accept a DC power input (12V).
9
RGB terminal Used as the connector terminal for RGB output, and SYNC output.
HD and VD signals are input/output. When the random trigger operation is used,
the trigger signal is input and the index signal is output. This terminal also includes
an RS232C format control.
DISP
PAGE
DC IN 12V
RGB
MENU
DATA
(AWB)
1
8
2
4
6
7
5
9
3
Prism faceplate
RGB terminal
DISP button
PAGE button
[ Rear ][ Front ]
MENU UP button
MENU DOWN button
DATA UP (AWB) button
DATA DOWN button
DC IN 12V terminal
2004.03.24, 0:59 PMPage 7