Filter
Top Products
- 10 -
6-2-2 Installation to Junction Box with Bracket (Flush Mount Installation)
83.5 mm
46 mm
Screws (not supplied)
x4
Screws
x3
Bracket
Mount camera base with three supplied
screws B. (Shorter screw(M4x10))
Tighten and lock the screws firmly.
Align the marks.
Align to this mark.
Mount the top cover (the assembly
of the top dome cover) and secure
it firmly with three security screws
by the supplied special hexangular
wrench.
Note the direction of
the bracket, which has
two sides.
Junction Box