Toshiba IK-VR01A Camcorder User Manual


 
- 7 -
6. INSTALLATIONS
Connect the cable of the camera and the cable from the designated power supply
with respective connectors.
Screws for fixing the camera and mounting base to the ceiling or wall are not supplied
with the unit. Use appropriate screws.
Note :
The weight (camera body only) is about 1.3kg. The camera unit including the mounting
base and the bracket weighs 2.1kg.
When installing to surfaces of other materials, use the screws to fix it firmly.
6-1 Adjust the Angle of View
a
Top Cover
Security screws
Camera Base
(1) Loosen the three security screws by the supplied special hexangular wrench and
remove the top cover.
Important Notice :
Be sure to remove three silver screws
a
immediately after removing the top
cover. The screws are used to temporarily fix the top cover for transportation.