Filter
Top Products
17
POWER
COLLIS
ION
LINK
RECEIVE
PARTITION
1
2
3
4
5
1
2
Ethernet switch
(not supplied)
General Connection (without PoE)
1. Connect the Network Camera to an Ethernet switch via LAN cable.
2. Connect the power cable from a power unit (not supplied) to the appropriate port of
the general I/O terminal.
(See page 11).
3. Connect the PC to an Ethernet switch via Ethernet cable.
Client PC
(not supplied)
3
l
Recommended power cord is twisted pair line with a minimum wire size of 18 AWG.
l
When PoE is connected, don't supply AC24V or DC12V from the I/O
terminal.
l
Never input AC24V and DC12V at the same time.
AC 120V
AC24V or DC12V adapter
UL Listed Class 2 power supply (not supplied)
NOTE
CAUTION