Filter
Top Products
20
Monitoring on the television
This camera is able to output an analog NTSC video signal and sound from the Audio/Video Out jack
in the backside of camera.
Adjustment of Viewing angle is possible using a portable monitor without using a personal computer
when installing. Use the included AV Out cable for this purpose.
Focus button
When adjusting the viewing angle, the camera focus may shift.
In this case, push the focus button in the backside of camera for 2 seconds or more. The zoom lens
will move to a wide position and the focus will move to the optimal position.
l
I Depending on an object's conditions, the focus may not move to the optimal position.
In this case, focus the lens manually from your personal computer.
1. Adjust the direction of the Camera to aim at the shooting area. (Refer page 12)
2. If you open the back cover when installation, replace the silica gel with a new one as follows.
3. You will nd a silica gel bag attached to the back cover.
Get out the supplied silica gel from the aluminum foil bag, and replace it to new silica gel with
supplied double-sided tape.
(Please replace the silica gel with a new one if you open the dome cover after installation.)
4. Secure the back cover to rotate it in clockwise direction. Make sure all parts of the camera are
securely installed.
Open
Close
Adjusting the direction and Silica Gel
IMPORTANT:
Zoom and Focus adjustment is made via the Remote Focus function on your web browser.
There is no mechanical zoom or focus adjustment for the camera.
NOTE
Treat silica gel bag with care. Do not tear the silica gel package.
WARNING:
Keep the silica gel out of the reach of babies, infants, and children.
DO NOT EAT, HARMFUL IF SWALLOWED