Filter
Top Products
2121
Adjusting the Lens
Based on the live image retrieved from the camera, adjust the camera lens by
performing the following:
To adjust the viewing angle
1. Turn the lens module left and right.
2. Loosen the tilt adjustment screws on both side of the camera and then turn the lens
module up and down. Upon completion, tighten the screws.
3. Turn the lens cover to adjust the image orientation.
Monitoring on the television
This camera is able to output an analog NTSC or PAL video signal and sound from the
Audio/Video Out jack.
Adjustment of Viewing angle is possible using a portable monitor without using a
personal computer when installing.
Use the included AV Out cable for this purpose.
Wall mounting
This camera is adjusted to the optimal position for ceiling mounting by default.
When installing to the wall, don't turn a lens cover 180 degrees.
And change the "Video orientation" of the camera.
Audio and Video>Image>General settings>Video settings> Video orientation:
Focus button
When adjusting the viewing angle, the camera focus may shift.
In this case, push the focus button on the camera body for 2 seconds or more. The
zoom lens will move to a wide position and the focus will move to the optimal position.
NOTE
l
Depending on an object's conditions, the focus may not move to the optimal position.
In this case, focus the lens manually from your personal computer.
IMPORTANT:
Zoom and Focus adjustment is made via the Remote Focus function on
your web browser. There is no mechanical zoom or focus adjustment for the
camera.
DO NOT over rotate the lens. Doing
so will damage the camera lens
module
2 3
Pan 350
o
Tilt 65
o
orientation 350
o
Filp Mirror