Filter
Top Products
- 48 -
Basic
Photography
Playing Back/
Erasing Images
Other
Applications
Additional
Information
Getting Ready
When the self-timer is used, the shutter automatically closes after the preset time (two or ten seconds).
☞
Changing the set time until photography
➲
Page 61
Set the mode dial to [ ] or [ ].
Press the self-timer button.
[ ] is displayed on the LCD monitor and the status display.
In the Manual Photography mode, [
] is not displayed on the LCD
monitor when the manual setup screen is displayed.
Press the ENTER button to set the manual setup screen to
non-display.
➲
Page 54
Compose the picture.
Press the shutter button down half way, and press it down fully.
➲
Page 37
The self-timer lamp blinks (in red) after lighting in red, and the viewfinder lamp blinks in green. The
photograph is then taken after the preset time (two or ten seconds).
When photographs are taken using the LCD monitor, the count down is displayed.
To cancel photography midway, press the
button.
After you have set the self-timer, the setting is not canceled even if the camera is turned OFF or the Auto
Power OFF function is activated.
The setting is canceled when you execute the self-timer photography, remove or insert the batteries or
disconnect or connect the AC adapter.
Photography Using the Self-timer (Self-timer Photography)