Filter
Top Products
- 49 -
Playing Back/
Erasing Images
Other
Applications
Additional
Information
Basic
Photography
Getting Ready
Photography Using the Flash (Flash Photography)
➔
In the default setting, the flash will be automatically set to function in dark places. No special setting is needed to
set off the flash. The flash firing mode can be set to suit the conditions where the flash is to be fired.
The effective firing distance of the flash is approximately 1.3 ft (0.4 m) to 10 ft (3 m).
Set the mode dial to [ ] or [ ].
Press the flash button to set to the desired mode
while viewing the image on the LCD monitor or the
status display.
Pressing the flash button displays the available flash modes in order.
The icon for the mode that you selected is displayed in the LCD
monitor or the status display.
In the Manual Photography mode, the icon for the mode that you
selected is not displayed on the LCD monitor when the manual setup
screen is displayed.
Press the ENTER button to set the manual setup screen to non-display.
➲
Page 54
Auto ➔ [ ] Red-Eye Reduction ➔ [ ] Forced Flash ➔ [ ] Suppressed Flash ➔ [ ] [ ] Slow Synchro
Compose the picture. Press the shutter button down
half way
1
, and press it down fully
2
.
Press down
half way.
Press down
fully.
1
2