Filter
Top Products
33
Enable Trigger Email
- SMTP Server Address: To use the e-mail alert function, you
must enter the mail server address in the field.
- Sender e-mail Address: Enter the e-mail Address of sender.
- Receiver e-mail Address 1/2: Enter the e-mail Address of
receiver(s).
- User Name: Enter the user name in this field to login
sender’s mail server.
- Password: Enter the user password in this field.
- Sending Interval: Enter the time interval to send next e-mail;
the unit is by second.
- Sending Times: Enter the sending times for every e-mail
alert.
- Send a test e-mail: When completed, you can do a test to
confirm the related settings by checking this option.
Trigger Output
Check the item to enable the camera to receive the signal from
specified detection area, and then enter the proper settings in the
Time Interval field.
Access Control
Click the Access Control
b
utton to bring up a dialog
window that contains list of
users, allowing the
administrator to assign
legal users who are
permitted to control the
trigger output.