TRENDnet TV-IP201 Security Camera User Manual


 
41
NOTE: You have to configure the network settings again after a Factory
Reset.
LED Control
The LED control allows user to setup the LED illumination as
desired. This feature provides the flexibility when surveillance
activity is ON. There are three options: Normal, ON, and OFF.
Update Firmware
This option allows you to update the firmware of the camera once
you obtained a latest version of firmware. Click Browse to find
the firmware file saved in your computer, and then click Update.
NOTE: It will take a few minutes to update firmware. Please wait to
complete the procedure; you can then reboot the camera.
Once the configuration is completed, click Home to return to the
Welcome screen and select the desired View Video option either
through ActiveX Mode or Java Mode as described in the next
section.
Then, position the camera to the desired location appropriately for
your purpose. Followed by adjustment of the camera focus, done
manually by turning the lens clockwise or anti-clockwise to the
desire image quality. Please refer to Appendix E for detailed
instruction.