Filter
Top Products
ENGLISHFRANÇAISDEUTSCHESPAÑOL
ÐÓÑÑÊÈÉ
8
1. Connect the Power Cord to the Injector.
Then connect the Power Cord to an outlet.
2. Connect a CAT-5e/6 cable from a switch to
the TPE-111GI's DATA IN port.
3. Connect a CAT-5e/6 cable from the
TV-IP252P to the TPE-111GI's DATA OUT port.
4. Verify that the LEDs are on.
Using the TV-IP252P with an Injector (TPE-111GI)