© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP672W / TV-IP672WI
26
The Pre-programmed Preset Positions is a list of presets you have setup under Preset
Position. This list is populated with different camera views and angles.
Patrol Selection
This area is where you setup the movement of the Pan/Tilt during a particular time
frame. This Patrol Position can be setup with different Pan/Patrol Speeds and Dwelling
time(s) in seconds. The Dwelling Time is the duration the camera takes to span a
particular area.
1. Setup the Preset Position – Once you have setup the Preset in the previous
configuration list, select it from the Pre-programmed Preset Positions.
2. Click the Select button to transfer this preset to the Patrol Position.
3. Set the position of your Preset. This depends on the priority of Patrol Position –
which item you want to make your priority.
4. For each Patrol Position you can adjust the Pan/Patrol Speed (1-3 with 1 being
the slowest), and Dwelling Time (in seconds). This indicates the time needed to
span an area covered by the camera.
5. Click Apply to continue and finish the process.