TRENDnet TV-IP851WC Security Camera User Manual


 
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP851WC / TV-IP851WIC
27
Wireless
Connection Mode: Infrastructure is a wireless connection using an access point
as a transmission point of all wireless devices. Ad-Hoc is a wireless connection
used without an access point, where your TV-IP851WC or TV-IP851WIC is
directly connected to your PC. This is done using the on-board wireless
adapter on the TV-IP851WC or TV-IP851WIC connected to a wireless
adapter on the PC.
SSID: Service Set Identifier. This is an identifier for your network. Manually
enter the SSID of your wireless network or select it from the drop down menu.
You can click Site Survey to see a list of wireless networks within range and
further details of their settings.
Wireless Channel: When using Infrastructure mode, the channel is specified by
the access point and the channel will not be selectable on this menu. When
using Ad-Hoc mode, you can specify on which channel you want to
communicate with the camera.
Encryption Type: It is highly recommended that you encrypt the connection. In
Infrastructure mode, select an encryption type and enter details where
applicable as you have specified on the access point. If you intend to use Ad-
Hoc mode, you can specify here the encryption type and preshared key that
you want to use to connect from the PC.