TRENDnet Wireless PTZ Cloud Camera Security Camera User Manual


 
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP851WC / TV-IP851WIC
2
Product Hardware Features
Rear Panel View
LAN Port Connect Ethernet cables to your wired network devices.
Power Port Connect the included power adapter from your camera to an
available power outlet.
Note: Use only the adapter that came with your camera.
Reset Button Use an item such as a paperclip to push and hold this button for
3 seconds and release to reset your camera to its factory defaults.
WPS (Wi-Fi Protected Setup) Push and hold this button for 3 seconds to
activate WPS. The button LED is blinking green when WPS is activated.
Antenna 2dBi detachable antenna
Front Panel View
IR LED Built-in 4 IR LED for night vision uses. (for TV-IP851WIC)
Light Sensor Detects the light source to turn IR on or off.
Focus Ring Turn to adjust the focus of the camera.
Microphone Built-in microphone for audio can be turn on or off.
Privacy button Press the privacy button to redirect the camera’s viewing
position to a downward and obscured view. To return the camera to the
previous viewing position, wait 5 seconds and then press the privacy button
again.
Power - This LED indicator is solid blue when your camera is powered on.
Otherwise if this LED indicator is off, there is no power to your camera.
Link This LED indicator is blinking orange when there is connection/data to
your camera.
IR LED
Power port
LAN port
Light Sensor
Microphone
Camera Lens
Power/Link LED
Antenna
WPS button
Reset button
Privacy button
Focus Ring
Rear Air Vents