Unibrain 530 Digital Camera User Manual


 
Unibrain Fire-i 530/630/830 Operation Manual Page 21
0:OFF, 1:ON
If this bit=0, other fields will be read only.
A_M_Mode [7] Write: set the mode,
Read: read a current mode
0: Manual, 1:Auto
- [8..19]
Reserved
Value [20..31] Value : Write the value in Auto mode, this filed is
ignored.
If “ReadOut” capability is not available, read value
Has no meaning
3.3. Sharpness
The sharpness control feature may be used to compensate low-pass effects caused for instance by the special color
interpolation. If you do not prefer such signal manipulation, you may switch it OFF.
For sharpness control inquiry and status register, follow the same definition as BRIGHTNESS”.
3.4. White Balance
Color models have the white balance feature which can be controlled automatically or manually, U/R(Red/Green)
and V/B(Green/Blue) alter the degree to which Red and Blue CCD component pixels are weighed to form composite
pixels. In manual mode you can adjust the white balance by altering the Blue(U/V) and Red Value(V/R). In
addition, the one push white balance option can be used for a non-interactive calibration.
Inquiry Register
Address Name Field Bit Description
50Ch WHITE_BAL
_INQ
Presence_Inq [0] Presence of this feature
Abs_Control_Inq [1] Capability of control with absolute value
- [2] Reserved
One_Push_Inq
[3] One push auto mode(Controlled automatically by
camera only once)
ReadOut_Inq [4] Capability of reading the value of this feature
On/Off_Inq [5] Capability of switching this feature On and OFF
Auto_Inq [6] Auto mode(Controlled automatically by camera)
Manual_Inq [7] Manual mode(Controlled by user)
Min_Value [8..19] Minimum value for this feature control
Max_Value [20..31] Maximum value for this feature control