Filter
Top Products
Troubleshooting
If your BC860XLT is not performing properly, try the following steps.
Problem Suggestion
Scanner won’t work •
Check the connections at both ends of the AC Adapter.
•
Turn on the wall switch of your room. You could be using an outlet controlled by the wall switch.
•
Move the AC Adapter to another wall outlet.
Improper reception •
Check antenna connection
•
Move or angle the antenna.
•
If programmed frequency is higher than 406 MHz, a shorter antenna length may improve the reception.
•
Relocate the scanner.
•
You may be in a fringe area. This could require an optional multi-band antenna. Check with your dealer
or local electronics store.
Scan won’t stop •
Adjust squelch threshold - refer to page 10,
Setting the Squelch.
•
Check the antenna connection.
•
Check to see if many of the channels are locked out. If so, the scanner has less chance of finding an
active channel.
•
Review each channel’s frequency to see if it is correct and no memory has been lost.
•
Possibly, none of the programmed frequencies are currently active.
Scan won’t start •
Press the Scan key again.
•
Adjust the Squelch control.
•
Check to see if 99 channels are locked out. If so, all but one channel is locked out.
Weather Scan won’t work •
Adjust squelch to the threshold - Refer to page 10,
Adjusting the Squelch
.
•
Check antenna.
•
No active station within range.
35