Setup
Note
Extend the antenna to its full height. For UHF
frequencies, shortening the antenna may
improve the reception.
If your scanner receives strong interference or
electrical noise, move the scanner or its
antenna away from the source.
If you are operating the scanner in a fringe area
or need to improve reception, use an optional
antenna designed for multi-band coverage.
(You can purchase this type of antenna at a
local electronics store.)
If the plug at the end of the cable does not
match the antenna jack, you may need to
purchase an adapter.
Plug an optional external speaker
(ESP25, 8 ohms) into the EXT.SP jack.
Warning!
Use only the supplied AC Adapter - AC144U
7