Filter
Top Products
8
• Setting Flash Mode
Turn on the camera. Set the Capture/Playback selector to Capture mode.
Press to select item
Press
Press
Press
Press
Different flash setting applies to different situation.
Auto flash: The flash fires automatically as needed. Use this setting to take most pictures.
Flash on: The flash fires for every picture. Use this setting indoors in low light.
Flash off: The flash does not fire. Use this setting for outdoor pictures or where flash is prohibited or
may be distracting. Also use when shooting toward a reflective surface, such as a window
or mirror. If you do not have enough light when using this setting, your pictures will be
too dark.
NOTE:
Effective ash light range: Approx. 1 ~ 1.5 m (Approx. 3 ~ 5 feet).
• Setting Quick View
You can choose to save or delete picture(s)/video clip immediately after taking picture(s) or recording video
clip.
Turn on the camera. Set the Capture/Playback selector to Capture.
Press
Press Press
Press
Press
Press to select item
Select “EXIT” to exit
When quick review feature is activated, in Still Picture and Continuous Pictures mode, LCD screen shows
“Continue/Delete” after taking picture(s). Selecting “Continue” to save picture(s) taken, while selecting
“Delete” to delete picture(s) taken.
In Video mode, LCD screen shows “Save/Delete” after recording video clip. Selecting “Save” to save video
clip recorded, while selecting “Delete” to delete video clip recorded and continue your operation.