Filter
Top Products
26 VISIONEER MX 230 DIGITAL CAMERA USER’S GUIDE
SET UP MODE
Set Up mode is used to configure your camera. When you turn the
Mode dial to Set Up, the following menu displays on the LCD.
Each menu option is described below.
Delete All: This option is used to delete all images from the
internal memory or the Secure Digital card. To determine, or
change, the current memory type, refer to “Memory Type” on
page 31.
1. From the Set Up menu, press the Up or Down buttons to
select Delete All, and then press the Display button.
2. On the Delete All screen, press the Up or Down buttons to
select No or Yes, and then press the Display button.
Format: This option is used to erase and reformat the Secure
Digital card. You should occasionally format the Secure Digital
card to ensure it functions optimally.
Note: To exit a Set Up mode selection without saving changes,
press the Delete button.
SET UP