VistaQuest VQ-7228 Digital Camera User Manual


 
- 17 -
11. Deleting files
Delete item allow user to delete current or all the stored images from the internal memory or
SD card.
• Deleting files
1.Turn on the camera.
2.Press the button(playback status).
3.Push the joystick left or right display the picture you want to delete.
4. Press the menu button and you will see [delete] option is selected (default).Press the OK
button to enter the submenu, then push the joystick up or down to select single/all/select.
* If you select [single] and press the OK button, the picture on the LCD screen will be delete
directly.
* If you select [all] and press the OK button, you will see two options: Cancel/Execute
(Cancel means not delete all the files; Execute means delete all the files.)
* If you select [Select] and press the OK button, the files will show on the LCD screen as
thumbnail. Press up/down/left/right button to select the file you want to delete and then
press the OK button to confirm the setting.
Note: 1.Files that are erased cannot be recovered. Make sure you have selected the
images you want to erase.
2.Files that have been protected (see the following section) cannot be erased even if
“Delete All” is selected.