VistaQuest VQ-7228 Digital Camera User Manual


 
- 23 -
[Auto Off]
1MIN Setting the camera automatically powers off approximately 1 minute.
3MIN Setting the camera automatically powers off approximately 3 minutes.
5MIN Setting the camera automatically powers off approximately 5 minutes.
Off Setting the camera always on.
[Sys. Reset]
Cancel Do not recover to system reset.
Execute Recover to system reset.
[Light Freq.]
60Hz Setting the flicker frequency to 60 Hz.
50Hz Setting the flicker frequency to 50 Hz.
[TV Output]
NTSC Setting the TV Output to NTSC.
PAl Setting the TV Output to PAL.
[Date Input]
Off Do not input the time on the file.
Set Input the time on the file.
[MODE BUTTON]
In Capture status, press the mode button once to enter video status; press mode button twice
to enter voice pen status and the captures succeed the voice pen mode.