Vivotek 72P Security Camera User Manual


 
VIVOTEK
User's Manual - 15
Fine-tune the CS-Mount
The following applies only when you have troubles getting sharp images with particular
lens:
1. Detach the CS-mount lens from the camera body.
2. Use the supplied L-type hex key wrench to loosen the lens retention screw. When done,
the CS-mount adapter ring becomes rotatable.
3. Use a removal tool to turn the CS-mount adapter ring; ne-tune the focal length between
the sensor and the lens.
4. When nished, tighten the lens retention screw to secure the CS-mount adapter ring.
5. Attach the CS-mount lens back to the camera body.
1
2
3
Lens retention screw
CS-mount adapter ring