Filter
Top Products
VIVOTEK
42 - User's Manual
■ Sharpness:
Adjust the image sharpness level, which ranges from 0% to 100%.
You can click on Restore to recall the original settings without incorporating the changes. When
completed with the settings on this page, click Save to enable the setting.
If you want to congure another sensor setting using the schedule mode, please click Prole to open
the Prole Settings page as shown below.
Please follow the steps below to setup a prole:
1. Select the Enable and apply this prole checkbox.
2. Select the Schedule mode. Please manually enter a range of time.
3. Congure the White balance and Image adjustment settings in the following columns. Please refer to the
previous page for detailed information.
4. Click Save to enable the settings and click Close to exit the page.