Filter
Top Products
VIVOTEK
188 - User's Manual
URL Command Document for All Series
relative path according to the current path.
8.9 IP Filtering
Note: This request requires Administrator access privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/admin/ipfilter.cgi?
method=<value>&[start=<ipaddress>&end=<ipaddress>][&index=<value>]
[&return=<return page>]
PARAMETER VALUE DESCRIPTION
method addallow Add allowed IP address range to the server. Start and end
parameters must be specified. If the index parameter is
specified, it will try to add starting from the index position.
adddeny Add denied IP address range to the server. Start and end
parameters must be specified. If the index parameter is
specified, it will try to add starting from the index position.
deleteallow Remove allowed IP address range from server. If start and
end parameters are specified, it will try to remove the
matched IP address. If index is specified, it will try to
remove the address from given index position. [start, end]
parameters have higher priority then the [index] parameter.
deletedeny Remove denied IP address range from server. If start and
end parameters are specified, it will try to remove the
matched IP address. If index is specified, it will try to
remove the address from given index position. [start, end]
parameters have higher priority then the [index] parameter.
start <ip address> The starting IP address to add or to delete.
end <ip address> The ending IP address to add or to delete.
index <value> The start position to add or to delete.
return <return page> Redirect to the page <return page> after the parameter is
assigned. The <return page> can be a full URL path or
relative path according to the current path. If you omit this
parameter, it will redirect to an empty page.