Vivotek FD8133V Security Camera User Manual


 
VIVOTEK
User's Manual - 161
46
lens_focus, len_iris.
0(fields are valid),
1(fields are invalid)
eptz <positive integer> 7 0/7 A 32-bit integer, each bit can be set
separately as follows:
Bit 0 => stream 1 supports ePTZ or
not.
Bit 1 => stream 2 supports ePTZ or
not.
The rest may be deduced by analogy
npreset <positive integer> 20 0/7 Number of preset locations.
protocol_https < boolean > 1 0/7 Indicate whether to support HTTP
over SSL.
protocol_rtsp < boolean > 1 0/7 Indicate whether to support RTSP.
protocol_sip <boolean> 0 0/7 Indicate whether to support SIP.
protocol_maxcon
nection
<positive integer> 10 0/7 The maximum allowed simultaneous
connections.
protocol_maxgen
connection
<positive integer> 10 0/7 The maximum general streaming
connections .
protocol_maxme
gaconnection
<positive integer> 0 0/7 The maximum megapixel streaming
connections.
protocol_rtp_mul
ticast_
scalable
<boolean> 1 0/7 Indicate whether to support scalable
multicast.
protocol_rtp_mul
ticast_
backchannel
<boolean> 0 0/7 Indicate whether to support
backchannel multicast.
protocol_rtp_tcp <boolean> 1 0/7 Indicate whether to support RTP
over TCP.
protocol_rtp_http <boolean> 1 0/7 Indicate whether to support RTP
over HTTP.
protocol_spush_
mjpeg
<boolean> 1 0/7 Indicate whether to support server
push MJPEG.
protocol_snmp <boolean> 1 0/7 Indicate whether to support SNMP.
protocol_ipv6 <boolean> 1 0/7 Indicate whether to support IPv6.
videoin_type 0, 1, 2 2 0/7 0 => Interlaced CCD
1 => Progressive CCD
2 => CMOS