Filter
Top Products
VIVOTEK
User's Manual - 59
Video
This section explains how to congure the video settings of the Network Camera.
Video Settings
Video title: Enter a name that will be displayed on the title bar of the live video.
Color: Select to display color or black/white video streams.
Power line frequency: Set the power line frequency consistent with local utility settings to eliminate image
flickering associated with fluorescent lights. Note that after the power line frequency is changed, you
must disconnect and reconnect the power cord in order for the new setting to take effect.
Select caching stream: This Network Camera supports time shift cache stream on the Network Camera.
Select one stream and check the below option Enable time shift caching stream.
Video orientation: Flip--vertically reect the display of the live video; Mirror--horizontally reect the display
of the live video. Select both options if the Network Camera is installed upside-down (ex. on the ceiling)
to correct the image orientation. Please note that the preset locations will be cleared after ip/mirror.
Overlay title and time stamp on video: Select this option to place the video title and time on the video
streams.
Enable time shift caching stream
Advanced Mode
: Check this item to enable the time shift cache
stream on the Network Camera, which will stores video in the camera’s embedded memory for a period
of time depending on the cache memory of each Network Camera. This function can work seamlessly
with VIVOTEK’s recording software. When an event occurs, the recording software can request time shift
cache stream from the camera, which allows the user to acquire video data recorded before an event.
Video Title
Title and Time
Video 13:44:17 2010/01/13
2010/01/13 13:44:17