Filter
Top Products
VIVOTEK
User's Manual - 75
Patrol settings
You can select some preset positions for the Network Camera to patrol.
Please follow the steps below to set up a patrol schedule:
1. Use mouse clicks on the screen or the PTZ panel to move the current view to a desired position.
2. Enter a name as the Preset position name, and then click the Add button.
3. The position you created will be listed in the Preset locations column.
4. Repeat the above process by moving to different positions and mark those positions as Preset
positions.
5. Select a location each by a mouse click and click the Select button.
6. Selection locations will be listed in the Selected locations column.
7. You may then use the Up or Down button to change the patrolling order, or change the dwelling time
for the camera’s eld of view to stay on a specic location.
8. When done with all conguration details, click on the Save button.
2011/03/10 17:08:56
x2.0
1
2
6
5
3