Filter
Top Products
VIVOTEK
70 - User's Manual
If you want to congure another sensor setting for day/night/schedule mode, please click
Prole
to open
the Prole Settings page as shown below.
Please follow the steps below to setup a prole:
1. Check
Enable and apply this prole
.
2. Select the applied mode: Day mode, Night mode, or Schedule mode. Please manually enter a range of
time if you choose Schedule mode.
3. Congure the settings in the following columns. Please refer to the last page for detailed information.
4. Click
Save
to enable the settings and click
Close
to exit the page.
2011/03/13 17:08:56