Filter
Top Products
VIVOTEK
User's Manual - 73
Aut
o: If you set Exposure mode as
Auto
, the Exposure time and Gain control will be not congurable
since the sensor library will automatically adjust the value according to the ambient light. Then you can
set iris mode as "indoor" or "outdoor" to reach the best image quality.
You can click
Preview
to fine-tune the image, or click
Restore
to recall the original settings without
incorporating the changes. When completed with the settings on this page, click
Save
to enable the
settings.
If you want to congure another sensor setting for day/night/schedule mode, please click
Prole
to open
the Prole settings page as shown below.
Please follow the steps below to setup a prole:
1. Check
Enable and apply this prole
.
2. Select the applied mode: Day mode, Night mode, or Schedule mode. Please manually enter a range
of time if you choose Schedule mode.
3. Congure Exposure control settings in the folowing columns. Please refer to the last page for detailed
information.
4. Click
Save
to enable the setting and click
Close
to exit the page.
2011/03/13 17:08:56