Filter
Top Products
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
52 - User's Manual
Camera control
This section explains how to control the Network Camera's Pan/Tilt operation by connecting with a
PTZ scanner�
RS-485 Settings
Enable PTZ Operation :
Select this option to enable PTZ operation�
To utilize this feature, please connect the Network Camera with a PTZ scanner via RS485 interface
f
irst� VIVOTEK offers three PTZ drivers: DynaDome/SmartDOME, Lilin PIH-7x00 and Pelco D
protocol� If none of the above PTZ drivers is supported by your PTZ scanner, please select Custom
camera�
1
:
Refer to your PTZ scanner, set the Camera ID, PTZ driver, Port settings�
2
:
Select Enable PTZ Operation and then click Save to take effect�
3
:
The PTZ control buttons will be displayed in the main page�
PTZ control buttons
Pan / Tilt speed
Preset position
PTZ control buttons :
▲ :
Move the Network Camera up�
▼ :
Move the Network Camera down�
◄ :
Move the Network Camera left�
► :
Move the Network Camera right�