Filter
Top Products
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 97
Parameter Value Description
method
addallow
Add a set of allow IP
address range to server� Start
and end parameters must be specified� If the index
parameter is specified, it will try to add starting from
index position�
adddeny
Add a set of deny IP
address range to server� Start
and end parameters must be specified� If the index
parameter is specified, it will try to add starting from
index position�
deleteallow
Remove a set of allow IP
address range from server�
If start and end parameters are specified, it will try to
remove the matched IP address� If index is specified, it
will try to remove the address from given index position�
[start, end] parameters have higher priority then the
[index] parameter�
deletedeny
Remove a set of deny IP
address range from server�
If start and end parameters are specified, it will try to
remove the matched IP address� If index is specified, it
will try to remove the address from given index position�
[start, end] parameters have higher priority then the
[index] parameter�
start <ip address> The name of user to add, delete or edit
end <ip address>
The password of new user to add or that of old user to
modify�
The default value is an empty string�
index <value> The privilege of user to add or to modify�
return <return page>
Redirect to the page <return page> after the parameter
is assigned. The <return page> can be a full URL path or
relative path according the current path
� If you omit this
parameter, it will redirect to an empty page�
Get SDP of Streamings
Note: This request requires viewer access privilege
Method: GET/POST
Syntax:
http://<servername>/<network_rtsp_s<0~m-1>_accessname>
“m” is the stream number�
“network_accessname_<0~(m-1)>” is the accessname for stream “1” to stream “m”. Please refer to
the “subgroup of network: rtsp” for setting the accessname of SDP�
Y
ou can get the SDP by HTTP GET method�
Open the network streamings
Note: This request requires viewer access privilege
Syntax:
For http push server (mjpeg):
http://<servername>/<network_http_s<0~m-1>_accessname>
For rtsp (mp4), user needs to input the url below for a rtsp compatible player�