Vivotek v Digital Camera User Manual


 
www.vivotek.com
T: 886-2-82455282
F: 886-2-82455532
For the series number in the “Serial Number” field, please check the label on the
bottom of the camera.
The IP addresses shown in the "Current IP Address" field reflect those on the local
network. They may be from the DHCP server. If there is no DHCP server, the
camera will try to find a free IP address (this takes from 15 second to 3 minutes,
depending on the LAN status). The method of finding IP address is seeking from
192.168.0.99, to 192.168.0.254. If any of the address inside this range is free, the
Network Camera will be assigned to this IP address, and its subnet mask would be
255.255.255.0. If none of the addresses is free, the Network Camera will try the
range from 192.168.0.2 to 192.168.0.98. After an IP address is assigned to the
camera, the “Activity” status LED blinks.
The Vivotek’s new UPnP function will always assign an IP address for the Network
Camera. The Administrator can click on button “Link to selected device” to connect
the I.E. to the camera.
If the camera is not on the IP installer list, click on the “Search” button to search for
the camera on the LAN.