www.vivotek.com
T: 886-2-82455282
F: 886-2-82455532
input events. The string must conform to that of the external FTP server. Some FTP
servers cannot accept preceding slash symbol before the path without virtual path
mapping. Refer to the instructions for the external FTP server for details. The folder
privilege must be open for upload.
“1st FTP remote folder for motion detection” Granted folder on the external
FTP server. This folder is for images captured due to motion detection events. The
string must conform to that of the external FTP server. Some FTP servers cannot
accept preceding slash symbol before the path without virtual path mapping. Refer
to the instructions for the external FTP server for details. The folder privilege must
be open for upload.
“1st FTP passive mode” The Network Camera is located inside the network
protected by a firewall, data connection for FTP may be prohibited. By selecting
passive mode, the FTP can bypass the rule and allow snapshot upload to proceed. If
the passive mode is selected, the Network Camera can automatically attempt for
active mode, if the external FTP server does not support passive mode.
“2nd FTP server” The domain name or IP address of the backup FTP server.
“2nd FTP server port” The port to access the backup FTP server.
“2nd FTP user name” Granted user name on the backup FTP server.
“2nd FTP password” Granted password on the backup FTP server.
“2nd FTP remote folder” Granted folder on the backup FTP server. This folder is for
system log information and for images captured due to sequential operation or digital
input events.
“2nd FTP remote folder for motion detection” Granted folder on the external
FTP server. This folder is for images captured due to motion detection events.
“2nd FTP passive mode” Passive mode setting for the backup FTP server.