VIVOTEK
116 - User's Manual
support), 1(support)
Bit 3 => Support tilt operation; 0(not support),
1(support)
Bit 4 => Support zoom operation; 0(not
support), 1(support)
Bit 5 => Support focus operation; 0(not
support), 1(support)
Bit 6 => Support iris operation; 0(not
support), 1(support)
Bit 7 => External or built-in PT; 0(built-in),
1(external)
Bit 8 => Invalidate bit 1 ~ 7; 0(bit 1 ~ 7 are
valid), 1(bit 1 ~ 7 are invalid)
Bit 9 => Reserved bit; Invalidate lens_pan,
Lens_tilt, lens_zoon, lens_focus, len_iris.
0(fields are valid), 1(fields are invalid)
npreset <positive integer> 0/7 Number of preset locations.
eptz <positive integer> 0/7 A 32-bit integer, each bit can be set separately
as follows:
Bit 0 => stream 1 supports ePTZ or not.
Bit 1 => stream 2 supports ePTZ or not.
The rest may be deduced by analogy
protocol_https < boolean > 0/7 Indicate whether to support HTTP over SSL.
protocol_rtsp < boolean > 0/7 Indicate whether to support RTSP.
protocol_sip <boolean> 0/7 Indicate whether to support SIP.
protocol_maxconn
ection
<positive integer> 0/7 The maximum allowed simultaneous
connections.
protocol_maxgenc
onnection
<positive integer> 0/7 The maximum general streaming connections .
protocol_maxmeg
aconnection
<positive integer> 0/7 The maximum megapixel streaming
connections.
protocol_rtp_multi
cast_scalable
<boolean> 0/7 Indicate whether to support scalable multicast.
protocol_rtp_multi
cast_backchannel
<boolean> 0/7 Indicate whether to support backchannel
multicast.
protocol_rtp_tcp <boolean> 0/7 Indicate whether to support RTP over TCP.
protocol_rtp_http <boolean> 0/7 Indicate whether to support RTP over HTTP.
protocol_spush_mj
peg
<boolean> 0/7 Indicate whether to support server push
MJPEG.
protocol_snmp <boolean> 0/7 Indicate whether to support SNMP.