Vivotek VS8102 Security Camera User Manual


 
VIVOTEK
6 - User's Manual
Hardware Reset
The reset button is used to reset the system or restore the factory default settings. Sometimes
resetting the system can return the video server to normal operation. If the system problems
remain after reset, restore the factory settings and install again.
Reset: Press and release the recessed reset button with a paper clip or thin object. Wait for the
video server to reboot.
Restore: Press and hold the recessed reset button until the status LED rapidly blinks. It takes
about 30 seconds. Note that all settings will be restored to factory default. Upon successful
restore, the status LED will blink green and red during normal operation.
SD/SDHC Card Capacity
This video server is compliant with SD/SDHC 16GB / 8GB and other preceding standard SD
cards.
Audio
Out
Video
Reset
SD Card
Audio
In
Recessed Reset Button