Filter
Top Products
O P E R ATION (CONTINUED)
9
Press the Mode/Power button
once to turn the unit on.
The counter (i.e. '25', '18', etc.)
will appear in the display.
1
Press the Shutter/Select button to
take a picture; the LED will blink
once and the counter in the
display will decrease by one.
2
TAKING A SINGLE PICTURE
Turn the camera on as described
on page 8. Press the Mode/Power
button twice to select the Self
Timer mode; “St” will appear in the
display.
1
Within three seconds, press the
Shutter/Select button to select the
Self Timer mode. The LED will
blink and the camera will beep
nine times. On the tenth beep, the
picture will be taken.
2
SETTING THE SELF TIMER MODE
DDC9000P.qxp 7/15/05 10:40 AM Page 9