Filter
Top Products
3 Installation
3.1 Connecting Your IPC-4605N
The picture below illustrates the basic connection of your IPC-4605N camera:
The following table describes the numbered items:
Number Contents
Ethernet cable from PC to hub/router.
Ethernet cable from router to camera. Use the bundled Ethernet cable to
connect the LAN port of the IP camera to the LAN port of your hub/router.
Wireless adapter (optional). If you’re using the USB Wi-Fi adapter, plug it into
the USB port on your camera for wireless reception.
Power: Attach the power adapter to the camera’s power port, and connect the
plug to a power outlet.
Important!
The Camera’s USB port only supports the bundled ZyXEL Wireless adapter.
Do not rotate your camera by hand. Doing so can damage the camera
After unplugging the camera’s power cable, wait at least 4 seconds before
restoring power to the camera.