Filter
Top Products
6.7.3 Motion Detection
Motion Detection allows you to define up to three regions that will trigger an event if
motion is detected.
Select a region, sensitivity level (S1: Lowest ~ S5: Highest) from the dropdown list, and
then click and drag on the video display to define the region. Click [Save] for settings to
take effect.
6.7.4 I/O Status
The I/O Status page displays the status of devices plugged into I/O ports.
6.7.5 Audio Detection
The Audio Detection page allows you to define the threshold at which sound will trigger
an event. The audio detection function on this IP camera works by measuring volume
levels.
Sensitivity Trigger Threshold
Low Approx 65~70dB
Medium Approx 80~85dB
High Approx 100~105dB
6.8 Recording Setup
The IPC-4605N supports storage of both snapshots and video clips to local storage. To
configure this function, navigate to [Setup] > [Recording Setup]. The following screen
will appear.