Filter
Top Products
6.6.1.3 PTZ Position Reset
The PTZ Position reset menu allows you to reset the PTZ functionality back to factory
defaults. There are two reset buttons:
Button Function
Calibrate PTZ Back to Factory Default Calibrates Pan/Tilt position back to factory
defaults
Reset PTZ Home Position Back to Factory
Default
Resets the camera’s Home position back to
factory default.
6.6.2 Patrol Mode
The Patrol Mode menu allows you to define your camera’s behavior while in patrol
mode. To access this menu, navigate to [Settings] > [PTZ Control] > [Patrol Mode]
6.6.2.1 Patrol Ordering
After you have created preset points, you’ll be able to configure how long the camera will
stay in each position while in patrol mode. To set the patrol order, check and select preset
positions from the drop-down menu, then enter the duration for each preset position.
Press [Save] to apply settings.
6.6.2.2 Patrol Speed
The Patrol Speed settings allow you to choose how quickly your camera will patrol –
Fast, Medium, or Slow. After you’ve chosen a speed setting, click the [save] button to
save your settings.