Filter
Top Products
This page allows you to view your SD Card’s status, capacity, and gives you the option
of formatting the card, as well as enabling recording to an SD card in the event of
network failure.
Click [Next] to continue. The following screen will appear.
This page allows you to configure the circumstances in which recording to the SD card
will occur. Users may choose to record when motion is detected, when audio is detected,
when digital input(s) are detected, and the duration of the recording in seconds.
Users may also schedule recording, or disable recording entirely.
Click [Save] to complete recording setup.
Note:
This camera uses a First In, First Out storage method. When the SD
card is full, the oldest files will be automatically rewritten.
If you want to record video clips of detected motion to the SD card,
you’ll need to set a motion detection region before setting up event-based
recording.