A SERVICE OF

logo

I
-
I
-
Preparing For Use
Printing or Plotting
Interconnection
and
Printing
Instructions
1. Turn off the cable TV analyzer and the printer.
NOTE
The
RS-232
interface allows only one device (either the printer or the plotter) to be connected to the
cable TV analyzer. Refer to the programmer’s guide for more information on
RS-232
protocol and cable
wiring.
2. Connect the printer using an
RS-232
cable.
3. Turn on the cable TV analyzer and printer.
4.
Press @%FiQ, More
1
of 3
5.
To set the baud rate to 9600 baud, press BAUD RATE, 9600,
IHz).
To set
the baud rate to 1200 baud, press: BAUD RATE , 1200, (Hz).
I
I
NOTE
Some of the programs in this manual utilize 1200 baud. If your system uses the
RS-232
handshake
lines, you can use 9600 baud for all of the programs.
6. Press
@%?@,
Print Conf
fg
.
1-18
-1