• Remote support:
◦ Proxy server settings (optional)
• Time and region:
The current date and time or NTP server addresses, if you plan to use automatic date/time
configuration
◦
◦ Time zone region (for example, America/Los Angeles)
Figure 47 Welcome Page
Generate Service Processor ID
This page simplifies the process of creating the SP ID. Enter the StoreServ Serial Number and click
Generate SP ID to retrieve the SP ID. After the SP ID is generated, click Next.
NOTE: he StoreServ 7-digit serial number is located on the back of your HP 3PAR storage system
next to the power switch for the node enclosure PCM, and it begins with16 (for example, 1624635).
NOTE: During the SP Setup process, the StoreServ must be powered on, connected to the same
network subnet as the SP, and non-initialized to allow the SP to verify the StoreServ serial number.
Launching the HP 3PAR Service Processor Setup Wizard 55
