4
3
2
1
6
10
9
7
12
11
13
14
15
16
8
5
18
19
14
21
19
22
23
20
24
25
27
26
17
Use clamp (18) to install a gun
on the opposite side of the cart
when setting up the sprayer with
a gun on each side.
32 © Titan Tool Inc. All rights reserved.
Second Gun Assembly
(P/N 759-138 with gun
P/N 759-076 without gun)
Item Part # Description Quantity
1 862-436 Hex screw .................................................1
2 862-002 Lock washer .............................................1
3 424-226 Cable mounting clamp ..............................1
4 779-083 Clamp assembly .......................................1
5 424-288 Cable guide ..............................................1
6 756-124 Extension bar............................................1
7 779-106 Clamp .......................................................1
8 858-912 Screw, shoulder ........................................1
9 858-601 Nut ............................................................1
10 424-233 Gun holder ................................................1
11 424-224 Support arm ..............................................1
12 779-152 Gun control cable assembly .....................1
13 424-229 Grease tting ............................................1
14 424-248 Flanged bearing........................................2
15 858-637 Screw ........................................................1
16 756-034 Knob .........................................................2
17 316-533 Hose assembly, 6’ ....................................1
18 779-132 Clamp .......................................................1
19 858-603 Nut ............................................................2
20 860-936 Screw, shoulder ........................................1
21 424-202 Actuator lever ...........................................1
22 424-249 Sleeve bearing..........................................1
23 858-653 Screw, socket head ..................................1
24 858-002 Lock washer .............................................2
25 858-636 Screw, hex head .......................................2
26 550-290 Airless gun, S-3 ........................................1
27 661-517 Reversible tip, SC6 ...................................1
665-1908 Striping tip, SC6........................................1
Second Gun Installation
NOTE: The gun support beam must be removed to
install the second gun and hose. The sprayer
must be shut down before installation.
Before installing the second gun, follow the
“Pressure Relief Procedure” in the Operation section
of this manual. Once you have completed this
procedure, unplug the power supply cord. Failure to
reduce pressure can result in serious injury.
1. Engage the rst gun’s trigger lock.
2. Remove the trigger cable from the block of the rst gun.
NOTE: The gun or guns can be installed on either side of
the cart and can face either forward or backward.
Refer to the “Spray Gun Positions” illustration
near the back of this manual.
