Page 11VM-3500E
6.6 CHANGING THE GPS TIME
From the Factory the VM-3500E shows GPS satellite time or UTC time. A time
offset is needed to show the local time in your area.
1. Press and hold down the
[
CALL
]
key until “Radio
Setup” menu appears.
2. Press the
[
ENT
]
key, then select “Time Set” with the
CHANNEL selector knob.
3. Press the
[
ENT
]
key.
4. Turn the CHANNEL selector knob to select time off-
set from UTC. See illustration below to find your off-
set time from UTC. If “0:00” is assigned, the time is
the same as UTC (Universal Time Coordinated or
GMT Greenwich Mean Time).
5. Press the
[
ENT
]
key to store the time offset.
6. Press the
[
16/9
]
key or turn the CHANNEL selector knob to select “Exit,”
then press the
[
ENT
]
key to return to the “Radio Setup” menu, select “Exit”
and press the
[
ENT
]
key to return to radio operation.
OFFSET TIME TABLE
