VM-3500EPage 48
10.3 TIME LOCATION
This selection selects the time display between local time and UTC (time GPS
sends to radio). Time is displayed when GPS position (LAT/LON) is displayed
by pressing the
[
F
]
key followed by the
[
6
(
NAV
)]
key.
1. Press and hold down the
[
CALL/SET
(
MENU
)]
key
until “Radio Setup” menu appears.
2. Press the
[
ENT
]
key, then select “Time Disp.” in the
“Radio Setup” menu with the CHANNEL selector
knob.
3. Press the
[
ENT
]
key.
4. Turn the CHANNEL selector knob to select “UTC” or
“Local.”
5. Press the
[
ENT
]
key to store the selected setting.
6. To exit this menu and return to radio operation mode
press the
[
16/9
]
key.
n the local time mode, the display shows the time by the 12-hour system. Mean-
while, the display shows the time by the 24-hour system in the UTC mode.
10.4 TRUE MAGNETIC CHANGE
(
NAV display
)
This selection allows customizing the GPS COG (Course Over Ground) dis-
played on the LCD to be in True or Magnetic.
1. Press and hold down the
[
CALL
(
MENU
)]
key until
“Radio Setup” menu appears.
2. Press the
[
ENT
]
key, then select “Magnetic” in the
“Radio Setup” menu with the CHANNEL selector
knob.
3. Press the
[
ENT
]
key.
4. Turn the CHANNEL selector knob to select “On” (rep-
resenting “Magnetic”) or “Off” (representing “True”).
5. Press the
[
ENT
]
key to store the selected setting.
6. To exit this menu and return to radio operation mode
press the
[
16/9
]
key.
(
“UTC” mode
)(
“LOCAL” mode
)
