3Com 09-0704-001 Security Camera User Manual


 
2.3. De- installation 2-5
You may need to unload, then reload NetWare server to make the changes
take effect.
4 Insert the distribution diskette into the floppy drive and load the
AccessBuilder Security Client for Bindery (sbindery.nlm) or for NDS
(snds.nlm) -- (depending upon your NetWare Server's version and which
service is used).
:load sbindery 3com
where sbindery is NLM name for AccessBuilder Security Client for Novell
NetWare Bindery. 3com is the default password for AccessBuilder Security
Client.
:load snds 3com
where snds is NLM name for AccessBuilder Security Client for Novell
NetWare Directory Services. 3com is the default password for the
AccessBuilder Security Client.
SNDS Usage Optionally, SNDS may also take context_name as a parameter for remote
access authorization control. For example:
load snds security_password(key) /C:context_name [generic form]
load snds 3com /C:HQ.MyCompany [example]
SNDS will authenticate the remote user against the HQ.MyCompany context
so only user names assigned to that context will be successfully
authenticated. Other users will be denied.
If the context name is not specified in the loading command, SNDS will
authenticate the remote user against the default bindery context.
2.3. De-
installation
To remove the AccessBuilder Security Client function from the NetWare
Server, enter:
:unload sbindery
or
:unload snds