3Com 09-0704-001 Security Camera User Manual


 
2
NOVELL NETWARE
BINDERY/NDS SECURITY
CLIENTS
2.1 Overview
If you are not using the Novell NetWare Bindery/NDS Security Client, you
may skip this section.
The NDS (Netware Directory Services) Security Client is a Novell NLM that
runs on Novell Netware Server 4.X.
The Bindery Security Client is a Novell NLM runs on Novell NetWare Server
3.11 or 4.X.
When a remote user dials into an AccessBuilder and provides the login
information, the AccessBuilder server generates a validation request to the
Bindery/NDS Security Client. The Bindery/NDS Security Client then initiates
an authentication session with the Novell Netware server Bindery/NDS
services. Based on the result of the authentication session, the Bindery/NDS
security Client sends a validation response back to the AccessBuilder server
and indicates to the user that the authentication has failed or passed.
2.2. Installation To install the Bindery/NDS Security Client on a NetWare server, perform the
following steps (on the object server):
1 Verify that TCPIP NLM is running (by verifying the autoexec.ncf file).
If not, verify that Ethernet_II frame type is used. Bind IP to Ethernet_II frame
type. Following this, at the server prompt load TCPIP NLM.
The following are examples of an autoexec.ncf file which loads NetWare
Bindery Services, and NetWare Directory Services security clients: